Warehouse dock leveler for Truck Loading
Basic Info
Model No.: DCQ
Product Description
The hydraulic loading dock leveler will be installed into pit. Forklift trucks can drive directly to carriages from ground to carry out cargos. They can reduce a lot of manual works, improving working efficiency and saving time so as to gain greater economic benefit.
Feature:
- Fully hydraulic operation (both deck and lip)
- Hydraulic power unit incorporating internal filtration system.
- Fixed rear hinge remains flush with the rear of the pit to eliminate potential obstructions.
- Maintenance stand supports deck and lip during maintenance and service.
Safety:
- Surface slip resistant sheet.
- The lift has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity.
- Full-range, telescopic toe protection assures total dock attendant safety.
Model | Load capacity | Adjusting range | Table size | Total dimension | Motor power | |
up | down | |||||
DCQ-5 | 5t | +300mm | -250mm | 2000x2000mm | 2000x2000x600mm | 220V,0.75kw |
DCQ-6 | 6t | +300mm | -250mm | 2000x2000mm | 2000x2000x600mm | 220V,0.75kw |
DCQ-8 | 8t | +300mm | -250mm | 2000x2000mm | 2000x2000x600mm | 220V,0.75kw |
DCQ-10 | 10t | +300mm | -250mm | 2000x2000mm | 2000x2000x600mm | 220V,0.75kw |
DCQ-12 | 12t | +300mm | -250mm | 2000x2000mm | 2000x2000x600mm | 220V,0.75kw |
DCQ-15 | 15t | +300mm | -250mm | 2000x2000mm | 2000x2000x600mm | 220V,0.75kw |

We also supply spare parts free and supply technical supporting all the time. (Spare parts: control button, travel switch, Oil cylinder seals and the wrench etc.)
Product Categories : Static Hydraulic Dock Levelers